Nisssan R33 E-Lift


Lift your Drift car with a push of a button.
The ultimate Drift car accessory.
Easily change your wheels at the track.
Bolt in kit, only takes 10 minutes to fully install.


Price expected to be $300-$375. The current price is a placeholder.


Out of stock

(E-mail when Product is available)

SKU: elifts1301-1-1-1-1-1 Category: Tags: , , , , , , ,


Lift your Drift car with a push of a button.

The ultimate Drift car accessory.
Easily change your wheels at the track.
Bolt in kit: only takes 10 minutes to fully install.

Suits R33 Skyline Chassis

More info/ pics to come

Engineered to lift and lower your Drift car electronically, with a push of a button from its remote control. Lifting the rear of the chassis takes approx 22 seconds. This enables you to easily change your rear tires. E-Lift will lift the rear of your car only. 

The E-Lift is IP66 certified (water & dust resistant) and is rated for 800kg lifting capacity. The lifting arm has a stroke of 220mm (22cm). E-Lift will lift your r33, 220mm: measured from the ground to the rear lowest part of your r33’s differential. To check if E-Lift will work for you – Jack your car and once your rear wheels are off the ground. If the height is lower then 220mm then E-Lift will work in your vehicle. Contact us if you have questions.

E-Lift is powered from your vehicle’s battery or 12v power supply. No extra lines, wires, batteries are required.

This  r33 specific E-Lift kit contains:

  • r33 specific electronic lifting actuator (IP66 & 800kg rated)
  • 4m of wiring (will reach the front of your r33)
  • r33 mounting brackets & hardware
  • E-Lift power regulator, wireless receiver box + electrical connectors.
  • E-Lift wireless remote x 2
  • Instruction & install guides


This kit is applicable to Nissan r33 Chassis only – please see “Install” for more compatibility info. This it will not suit any other chassis. Other chassis coming soon!  (Skyline, 360z, JZX, FT86, etc) E-Lift kits are in development and will be available for sale soon, dependant on demand. If you want an E-Lift for your car, support us by sharing this product with owners of r33’s.

Let us know if you want E-Lift in your car and what chassis it is!

Please read the information on “PRE-SALE”  tab for all information regarding this sale!

Additional information

Weight 3.5 kg
Dimensions 40 × 20 × 15 cm
Installed weight

2.5kg approx


Black / Silver

Install Time

10 minutes approx

Diff Cover/ Subframe

2 Bolt, 4 Bolt

Use & Safety

E-Lift is for off-road, racetrack use only. A detailed install and usage guide is included in the E-Lift kit.

E-Lift is designed for you to change your wheels, and not for you to perform any other tasks where you may be under or obstruct the vehicle in any way.  

There is an inherent danger with lifting vehicles using any lifting system. Please respect all risks, use your best judgement and always stay safety conscious. Never ever get under or partially under a vehicle supported by E-Lift or any other vehicle jack.

Always use correct safety equipment when working under your car in any circumstance.  Mis-use or incorrect installation of E-Lift may cause injury or death. Use at your own risk.

Please be safe!

Free Divi WordPress Theme, Find new Free Android Games at