Lift your Drift car with a push of a button.
The ultimate Drift car accessory.
Easily change your wheels at the track.
Bolt in kit: only takes 10 minutes to fully install.
Suits Jzx90 Chassis
More info/ pics to come
Engineered to lift and lower your Drift car electronically, with a push of a button from its remote control. Lifting the rear of the chassis takes approx 22 seconds. This enables you to easily change your rear tires. E-Lift will lift the rear of your car only.
The E-Lift is IP66 certified (water & dust resistant) and is rated for 800kg lifting capacity. The lifting arm has a stroke of 220mm (22cm). E-Lift will lift your jzx90, 220mm: measured from the ground to the rear lowest part of your s15’s differential. To check if E-Lift will work for you – Jack your car and once your rear wheels are off the ground. If the height is lower then 220mm then E-Lift will work in your vehicle. Contact us if you have questions.
E-Lift is powered from your vehicle’s battery or 12v power supply. No extra lines, wires, batteries are required.
This jzx90 specific E-Lift kit contains:
- jzx90 specific electronic lifting actuator (IP66 & 800kg rated)
- 4m of wiring (will reach the front of your s14)
- jzx90 mounting brackets & hardware
- E-Lift power regulator, wireless receiver box + electrical connectors.
- E-Lift wireless remote x 2
- Instruction & install guides
This kit is applicable to Jzx90 only – please see “Install” for more compatibility info. This it will not suit any other chassis. Other chassis coming soon! (Skyline, 360z, JZX, FT86, etc) E-Lift kits are in development and will be available for sale soon, dependant on demand. If you want an E-Lift for your car, support us by sharing this product with owners of Jzx90’s.
Let us know if you want E-Lift in your car and what chassis it is!
Please read the information on “PRE-SALE” tab for all information regarding this sale!